Cap Co2 Regulator

Purchase Cap Co2 Regulator

The C.A.P. CO2 Regulator/Emitter will allow you to maintain ideal CO2 levels for optimum growth. It features an accurate, easy to adjust CO2 flow meter, a pre-set regulator that never needs adjusting, and solenoid valve. Each unit also comes with the tubing needed to disperse the CO2 evenly throughout your room by attaching the tubing to the back of an oscillating fan for even dispersion. If you are using this without a digital CO2 controller, you will need to use a timer (The Grasslin Grounded Timer is recommended). The flow rate is adjustable from .5 - 15 Cubic Feet Per Hour.

We sell 20 pound aluminum CO2 tanks. They are about 1/2 the weight of standard steel tanks. A 20 pound tank will last about a month in a 5' x 5' grow room. They can be filled at any beverage or welding supply store.

Purchase Cap Co2 Regulator

Other products in the category Growing Supplies / Atmosphere & Co2 Controllers / Co2 Equipment:

Cap Dual Tank Co2 Regulator -- The C.A.P. Dual CO2 Regulator/Emitter will allow you to maintain ideal CO2 levels for optimum growth. It features an accurate, easy to adjust CO2 flow meter, a pre-set regulator that never needs adjusting, . . .

Cap Lp Changeover Valve, Two Type 1 Pigtails and Regulator -- This Carbon Dioxide LP Changeover Valve allows you to connect your propane CO2 generator to two tanks so when one runs low, it can be changed out without extinguishing the pilot flame. It also doubles . . .

Cap Lp Conversion Kit, Complete With Orifice, Regulator, Labels -- Easily converts your GEN-1 or GEN-2 from NATURAL GAS to LIQUID PROPANE. Kit consists of replacement stickers to properly identify the unit, a replacement pilot orifice, and the correct regulator assembly. . . .

Cap Ng Conversion Kit, Complete With Orifice, Regulator, Labels -- Easily converts your GEN-1 or GEN-2 from LIQUID PROPANE to NATURAL GAS. Kit consists of replacement stickers to properly identify the unit, a replacement pilot orifice, and the correct regulator assembly. . . .

Co2 Expansion Burners -- Expansion burners for the GEN series allow you to customize your LIQUID PROPANE generator for your particular application. Burners come complete with an installation tool, package of anti-seize, and easy . . .

Co2 Tube 1/4&Quot; /Holes -- Co2 System replacement part.

Gen-1 Co2 Generator -- The GEN-1 is capable of producing between 3 and 13 cubic feet of CO2 per hour. It comes standard with one burner, producing approximately 3 cubic feet per hour.  You can add up to 3 additional burners, . . .

Gen-2 Co2 Generator -- The GEN-2 is capable of producing between 16 and 26 cubic feet of CO2 per hour. It comes standard with 5 burners, producing approximately 16 cubic feet of CO2per hour.  You can add up to 3 additional . . .

Hydrofarm Co2 (.2-2 Cubic Feet Per Hour) With Timer -- CO2 is an odorless, invisible, and non-flammable gas. It is also safe for humans in the maximum concentrations recommended for plant growth. The average level of CO2 in the atmosphere is about 300 PPM . . .

Hydrofarm Co2 (1-20 Cubic Feet Per Hour) With Timer -- CO2 is an odorless, invisible, and non-flammable gas. It is also safe for humans in the maximum concentrations recommended for plant growth. The average level of CO2 in the atmosphere is about 300 PPM . . .

Propane Crossover Valve -- The LPCV-1 liquid propane crossover valve will automatically switch from the empty tank to the full one. This will enable you to fill the empty tank at your convenience and suffer no downtime.

Regulator for Hydrofarm Co2 System -- CO2 is an odorless, invisible, and non-flammable gas. It is also safe for humans in the maximum concentrations recommended for plant growth. The average level of CO2 in the atmosphere is about 300 PPM . . .

Tubing / Co2 / 20' Drilled --