Sunleaves Pioneer Jr. Lighting Systems - 2 Foot

$119.95

Purchase Sunleaves Pioneer Jr. Lighting Systems - 2 Foot

Sunleaves Pioneer Jr. Light Systems

Year 'round gardeners can give their plants high-intensity, low-heat light with a space-saving Sunleaves Pioneer II Jr. T5 Fluorescent Fixture. This self-contained unit hangs vertically or horizontally and comes with two, 2' high-output Sunleaves VitaLUME T5 tubes, hanging hardware, five-year warranty (one-year on tubes) and a built-in 120-volt outlet to link multiple systems together. When fitted with two-foot VitaLUME PLUS T5 tubes, the Sunleaves Pioneer II Jr. operates on 48 watts and emits 3,600 lumens. The Pioneer II Jr. measures 23 3 /16� x 9 1/2� with a depth of 2 1/4".

Sunleaves Pioneer jr. II, IV, & VIII Instructions
Thank you for choosing to grow with Sunleaves products! Your satisfaction and success are important to us. For best results, carefully read the following instructions before using your Sunleaves Pioneer jr. II, IV, or VIII fluorescent light system.

About your Sunleaves Pioneer jr. Fixture
Delivers high yields with low wattage (II=48w, IV=96W, VIII=192W) Exclusive wide dispersion reflector design ensures maximum coverage Hangs vertically or horizontally Built in 120 volt outlet for linking multiple systems Designed for maximum ventilation Built-in electronic ballast

Using the Pioneer jr. Fixture
For your convenience, each Sunleaves Pioneer jr. comes prewired with tubes included. To use:
1. Remove all packing materials.
2. Install tubes if not already installed (see below).
3. Attach provided hanging wires to hooks. Be sure hooks are secure.                 Reflector should hang level (see below for vertical hanging instructions).
4. Plug into 120-volt outlet or timer to turn on light.
Note: DO NOT use fixture as a shelf, the hanging hardware is designed to support the weight of the fixture only.

Installing or Replacing Tubes in your Pioneer jr. Fixture
When it�s time to replace an old tube or install a new tube, simply follow these steps to replace Pioneer jr. tube(s):
1. Make sure fixture is powered off and unplugged.
2. To remove old tube: grasp tube at both ends, make a 1/4 turn and carefully     slide tube retainer pins from fixture slot.
3. To insert new tube: guide tube retainer pins into fixture slot. Make sure both     ends are fully seated and turn tube 1/4 turn.

For Vertical Positioning:
1. Remove hanging wires from their initial installation points by carefully                 unscrewing the hanger nut (the hanging wire stays in the nut).
2. Remove the caps from the end opposite the power cord.
3. Carefully screw hanging nuts into these holes.
4. Attach hanging wire to a secure hook.

Pioneer jr. Fixture Maintenance
For maximum reflectivity, be sure to keep the interior of your Pioneer jr. reflector free of dust and fingerprints. The fixture�s reflective surfaces can be gently cleaned with a soft, damp cloth. Before cleaning, make sure light system is unplugged and cool to the touch.

Purchase Sunleaves Pioneer Jr. Lighting Systems - 2 Foot

Select: Pioneer IV Jr. - 2 Tube; Pioneer VI Jr. - 4 Tube; Pioneer VIII Jr. - 8 Tube NEW; Pioneer 2 ft. VitaLUME Plus T5 Tube

Other products in the category Shop By Brand / SunLeaves:

Sunleaves Pioneer Lighting Systems - 4 Foot -- Sunleaves Pioneer Light Systems High-intensity, low-heat light with an efficient Sunleaves Pioneer IV Bloom T5 Fluorescent Fixture. Pioneers feature an exclusive wide dispersion reflector designed to . . .

RELATED PRODUCTS

Hydrofarm T5 Reflector Kit